Standarder

Man kan købe standarder gennem Safexpert™. Det gøres i pakker eller som enkeltstyks:

  • STANDARD Pakke 7 standarder 11.300 DKK engang / 1.675 DKK årligt
  • PLUS Pakke 60 standarder 17.800 DKK engang / 3.175 DKK årligt
  • Enkeltstyks (Se prisen på hver enkelt standard – eller bed om pris hos Bowitek)

Fordelene ved at erhverve og anvende standarder i Safexpert™ er:

  • Væsentlig billigere at købe standarder i pakker
  • Løbende opdateringer af standarder er med i abonnementet
  • Krydsreferencer og ”jumpmarks” er allerede indbygget i 36 standarder – uden merpris
  • Ofte billigere end at købe enkeltstyks standarder
  • Virksomhedens standarder er samlet et sted – tilgængelig for alle
  • Man får besked hvis en standard ikke længere er gældende – eller er under ændring
  • Søgning i fuldtekst standarder er utrolig nemt

STANDARD pakke med standarder.

STANDARD Pakken indeholder nedenstående (7 stk) full-txt standarder. Pakken kan ikke ændres. Prisen til højre er per styk, hvis man blot ønsker at købe den enkelte standard – uden løbende opdatering.

EN 60204-1:2018Safety of machinery - Electrical equipment of machines - Part 1: General requirements2.970
EN ISO 12100:2010Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)1.740
EN ISO 13849-1:2023Safety of machinery - Safety-related parts of control systems - Part 1: General principles design2.900
EN ISO 13850:2015Safety of machinery - Emergency stop - Principles for design790
EN ISO 13854:2019Safety of machinery - Minimum gaps to avoid crushing of parts of the human body600
EN ISO 13855:2010Safety of machinery - Position of safeguards with respect to the approach speeds of parts of the human body1.270
EN ISO 13857:2019Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs1030

PLUS pakke med standarder

PLUS pakken indeholder nedenstående (60) full-txt standarder. Pakken kan ikke ændres. Prisen til højre er per styk, hvis man blot ønsker at købe den enkelte standard uden løbende opdatering.

EN 547-1+A1:2008Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery685
EN 547-2+A1:2008Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings925
EN 547-3+A1:2008Safety of machinery - Human body measurements - Part 3: Anthropometric data600
EN 614-1+A1:2009Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles925
EN 614-2+A1:2008Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks1.030
EN 842+A1:2008Safety of machinery - Visual danger signals - General requirements, design, and testing600
EN 894-1+A1:2008Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators925
EN 894-2+A1:2008Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays925
EN 894-3+A1:2008Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators1.135
EN 894-4:2010Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators1.270
EN 981+A1:2008Safety of machinery - System of auditory and visual danger and information signals685
EN 1005-1+A1:2008Safety of machinery - Human physical performance - Part 1: Terms and definitions685
EN 1005-2+A1:2008Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery925
EN 1005-3+A1:2008Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation1.030
EN 1005-4+A1:2008Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery790
EN 1032+A1:2008Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value925
EN 1093-1:2008Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods600
EN 1093-2+A1:2008Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant685
EN 1093-3+A1:2008Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3: Test bench method for the measurement of the emission rate of a given pollutant685
EN 1093-4+A1:2008Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Capture efficiency of an exhaust system - Tracer method790
EN 1093-6+A1:2008Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet600
EN 1093-7+A1:2008Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet600
EN 1093-8+A1:2008Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method600
EN 1093-9+A1:2008Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method600
EN 1093-11+A1:2008Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index600
EN 1127-1:2019Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology1.135
EN 1746:1998Safety of machinery - Guidance for the drafting of the noise clauses of safety standards600
EN 1837:2020Safety of machinery - Integral lighting of machines685
EN 12198-1+A1:2008Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General925
EN 12198-2+A1:2008Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 2: Radiation790
EN 12198-3+A1:2008Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 3: Reduction685
EN 12786:2013Safety of machinery - Requirements for the drafting of the vibration clauses of safety standards790
EN 13861:2011Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery1.135
EN 62061+A2:2021Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems2.970
EN 62745:2017Safety of machinery - Requirements for cableless control systems of machinery1.410
EN 62745:2017+A11:2020Safety of machinery - Requirements for cableless control systems of machinery (Amendment)75
EN ISO 4413:2010Hydraulic fluid power - General rules and safety requirements for systems and their components1.270
EN ISO 4414:2010Pneumatic fluid power - General rules and safety requirements for systems and their components1.135
EN ISO 7731:2008Ergonomics - Danger signals for public and work areas - Auditory danger signals925
EN ISO 11161+A1:2008Safety of machinery - Integrated manufacturing systems - Basic requirements - Amendment 11.135
EN ISO 11553-1:2020Safety of machinery - Laser processing machines - Part 1: Laser safety requirements1.135
EN ISO 11553-3:2013Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser790
EN ISO 13732-1:2008Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces -1.270
EN ISO 13732-3:2008Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces -1.030
EN ISO 13849-2:2012Safety of machinery - Safety-related parts of control systems - Part 2: Validation1.740
EN ISO 13851:2019Safety of machinery - Two-hand control devices - Principles for design and selection925
EN ISO 13856-1:2013Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles for design and testing of1.270
EN ISO 13856-2:2013Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for design and testing of1.500
EN ISO 13856-3:2013Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of1.500
EN ISO 14118:2018Safety of machinery - Prevention of unexpected start-up790
EN ISO 14119:2013Safety of machinery - Interlocking devices associated with guards - Principles for design and selection1.500
EN ISO 14120:2015Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards1.345
EN ISO 14122-1:2016Safety of machinery Permanent means of access to machinery - Part 1: Choice of fixed means of access between two790
EN ISO 14122-2:2016Safety of machinery Permanent means of access to machinery - Part 2: Working platforms and walkways925
EN ISO 14122-3:2016Safety of machinery Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails1.030
EN ISO 14122-4:2016Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders1.345
EN ISO 14123-1:2015Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1:790
EN ISO 14123-2:2015Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2:685
EN ISO 14159:2008Safety of machinery - Hygiene requirements for the design of machinery1.030
EN ISO 14738:2008Safety of machinery - Anthropometric requirements for the design of workstations at machinery1.030
EN ISO 19353:2019Safety of machinery - Fire prevention and fire protection1.500

Risikovurdering ved brug af BSS

Vælg mellem +80 løsningsskabeloner som understøtter 3-trins metoden fra EN ISO 12100

BSS Beskrivelse 2021 (DA)
BSS Moduloversigt (DA)

Hjem

Ring op

Send email

Kontakt os